rollex - carabiner pulley for highline
  • rollex - carabiner pulley for highline
  • rollex - carabiner pulley for highline
  • rollex - carabiner pulley for highline
  • rollex - carabiner pulley for highline
rollex - carabiner pulley for highline
rollex - carabiner pulley for highline rollex - carabiner pulley for highline rollex - carabiner pulley for highline rollex - carabiner pulley for highline

ROLLEX - HIGHLINE CARABINER PULLEY

€41.63
SELECT MODEL
CHOOSE ROLLEX COLOUR
SELECT BRAKE
CHOOSE HARNESS CONNECTOR
SELECT ACCESSORY
Quantity

ROLLEX Slackline carabiner pulley

New generation carabiner pulley with a 25 mm roll. A must for every highliner, not only as a pulley but also as device to create a tensioning system. 

  • Material: anodized aluminum body and roll, two steel ball bearings (stainless steel for ROLLEX SS);
  • Weight: 129 gr.;
  • Compatibility: 24-26 mm width webbings;
  • Application: static element in a pulley system & transportation device to slide on a slackline;
  • Special features: ergonomic shape, 3 mm Ø lanyard hole to tie off a mini leash and a top smart slot for webbing or rubber brake like our SLIDE STOP;
  • Certification: ROLLEX is a device that complies with EN 12275:2013.

ROLLEX is available in stock and ready to be shipped.

 

If you are not happy with your purchase you can always return the product

ROLLEX highline pulley carabiner

ROLLEX, the lightest aluminum carabiner with a 1 inch roll. A roll that runs on 2 ball bearings (SS version has stainless steel bearings), which guarantees smooth sliding movements. The single surface aluminum roll also prevents jamming your the line between bearings. The surface of the roll is perfectly smooth without leaving any pressure marks on your slackline.

The gate opening reaches up to 24 mm width, to leave the maximum entry space for the webbing. 
ROLLEX is compatible with all slacklines from 24 to 26 mm width.

Optimized body shape of the ROLLEX

The shape of the ROLLEX body has been optimized for high strength usage, while stating only little weight of 129 gr.

The ROLLEX gate has a keylock shape in order to avoid snagging while clipping it to the line or harness.

NEVER DROP YOUR ROLLEX! - The the small lanyard hole under the gate allows you to tie it off safely with a 3 mm cord to your harness. This way you avoid dropoing your precious ROLLEX while clipping yourself to a highline.

ROLLEX' smart slot for BUCKINGHAM & SLIDE STOP

ROLLEX buckingham system

Above the pulley roll you'll find a slot for a 2.5 cm webbing. You can fill the slackline through this slot and easily create an independent tensioning system in combination with a clutch device such as LINEGRIP, SNATCH or equivalent.

ROLLEX BUCKINGHAM SYSTEM WITH SLACKIBLOC


But this slot on the top of your ROLLEX also serves as placement for our so called SLIDE STOP, which allows brakeable and controlled sliding on a highline.

The SLIDE STOP is very handy while taping the main line and backup, it prevents slipping over the line so you can use both of your hands for taping. Also, you can use the SLIDE STOP to rest while moving across a long line.

ROLLEX SG with screw nut gate

ROLLEX is available as a CLASSIC model with automatic lever, or as ROLLEX SG with screw nut gate. The ROLLEX SG' screw nut is compatible with the rear hole of a LINEGRIP in all versions (even line grip 4th generation).

Go on vacation with ROLLEX SS stainless steel

ROLLEX SS means stainless steel ball bearings, to be used even near the sea without oxidizing consequences.

ROLLEX is simply a new, advanced webbing pulley. Start your jorney and spin it up!

Warning

ROLLEX is a device that complies with EN 12275 standard. You always have to use a safety leash or another carabiner with opposing gate while sliding on a highline using a ROLLEX. Carefully read the instruction manual and follow the usage instructions described.

HRSCL

Data sheet

WEIGHT
129 gr.
WLL - WORKING LOAD LIMIT
4 kN
MBS - MINIMUM BREAKING STRENGTH 80MM DIVERTER
20 kN

Specific References

ean13
7616990000

Video

src="https://www.youtube.com/embed/Elp0zM2qEW0?rel=0&showinfo=0enablejsapi=1&origin=https://spider-slacklines.com/shop/&loop=0&vq=hd720p60"

Comments All reviews

Grade 
star star star star star
11/24/2020
star Verified Purchaser

Good!

These are very good as an alternative to hangovers. I like the continuous wheel and all the extra features.

Grade 
star star star star star
10/12/2020
star Verified Purchaser

Superior in every way

From continuous 1" SS bearing to the ability to automatically slide stop on huge lines, this piece of gear is superb and the best lineslide out there!

Grade 
star star star star star
09/09/2020
star Verified Purchaser

Fantastic device

I absolutely love this thing. It has made tensioning my lines a breeze. In combination with a linegrip you can tension your webbing with easy. I have never used a pulley system for slacking before but I can't see myself ever doing it now. This is a lighter, cheaper and quicker way to tension your line than any other options out there

Grade 
star star star star star
09/08/2020
star Verified Purchaser

Best lineslide in the market

Highly recommended. The full roll construction avoids pinching the webbing. Got mine with the lock to avoid having to pass it through both loops on harness. When not in use, the block avoids the lineslide accidentally catching the line during a fall

Grade 
star star star star star
09/01/2020
star Verified Purchaser

Gold standard

I like the one wheel instead of 4!

Write your review

ROLLEX - HIGHLINE CARABINER PULLEY

ROLLEX - HIGHLINE CARABINER PULLEY

ROLLEX Slackline carabiner pulley

New generation carabiner pulley with a 25 mm roll. A must for every highliner, not only as a pulley but also as device to create a tensioning system. 

  • Material: anodized aluminum body and roll, two steel ball bearings (stainless steel for ROLLEX SS);
  • Weight: 129 gr.;
  • Compatibility: 24-26 mm width webbings;
  • Application: static element in a pulley system & transportation device to slide on a slackline;
  • Special features: ergonomic shape, 3 mm Ø lanyard hole to tie off a mini leash and a top smart slot for webbing or rubber brake like our SLIDE STOP;
  • Certification: ROLLEX is a device that complies with EN 12275:2013.

ROLLEX is available in stock and ready to be shipped.

monetization_on Give us your opinion and we reward your feedback with a discount voucher of €1.00
*valid for 360 days
By submitting this review, you agree that it be published and publicly available.